Bubble Bar Adventures Part One

Let it foam! Let it foam! Can’t hold back these bubbles anymoreeeee.

Yea, I had to be lame and use a Frozen reference. Don’t pretend that you don’t blast that “Let It Go” song in your car when no one is around and sing with your hands in the air like you really mean it….ok maybe it’s just me. I digress.

So for the past couple of weeks I have been obsessed with DIY bath projects and currently, bubble bars are the bane of my existence. I’ve pretty much become obsessive with reading forums and blogs and whatever else I can find on how to create these little bars of joy.

I guess I should start with explaining the little bars of joy to everyone. Bubble bars are solid bubble bath bars that you can crumble into your bath which will produce a plethora of bubbles. You can add in moisturizing oils, essential oils, colorants and what not to create a luxurious bath experience. Some people make bath truffles which are a combination of bath bomb, bubble bar, and bath melts (we’ll get into these later). These bubble bars seem to have longer lasting bubbles and have the added advantage of essential oils which contain therapeutic functions. Sure, you can drop some oils into your normal bubble bath mix, but somehow I just don’t think it’s as exciting as crumbling an oz. of these bars to create a tub full of long lasting foamy bubbles.

The problem is bubble bars from Lush are pretty pricy in my opinion. A bubble bar alone would cost you ranges from $5-10. And honestly, combined with the price of a bath bomb, who is that balling to take $10+ baths all the time? Certainly not I. With that in mind, I set out on my bubble bar adventure.

After sifting through all the information I could find online, I narrowed it down to 3 different recipes. The base ingredients were very similar but the chemical reaction part of the recipes differed. Now, let me disclaimer myself and say that I am no professional soap maker nor am I a chemist so bear with me as I go through this process.

Thus far, I have tried 2 of the 3 recipes. The third recipe most closely resembles the ingredients from Lush, but it also contains some chemicals I just didn’t have on hand so I haven’t tested that recipe just yet.

Many of the recipes you find online contain either Sodium Lauryl Sulfate (SLS) or Sodium Lauryl Sulfoacetate (SLSa). These are the chemicals that create the fluffy clouds of bubbles everyone wants in their tubs. Lush uses SLS which many people try to avoid because of their skin sensitivity. There has also been a lot of research done regarding the dangers to your health when using SLS. According to the Environmental Working Group’s Skin Deep Cosmetic Safety Database, SLS is a “moderate hazard” that has been linked to cancer, neurotoxicity, organ toxicity, skin irritation and endocrine disruption. I am up in the air about the whole issue but I also assume that if Lush is using it and is making millions of dollars, that you can probably use SLS if you really wanted to.

SLSa is a milder chemical that is actually derived from coconut and palm oils and is considered of natural origin. Many people prefer SLSa over SLS because it doesn’t penetrate your skin cell which means less likelihood of any allergic or skin sensitivity. SLSa will create a lather that removes surface oil, dirt, and bacteria without stripping your skin. Most of the recipes I found used SLSa so I went with that.

The other ingredients I found that were common in most recipes were:

Baking Soda
Cream of Tartar
Corn Starch
Essential Oils
Glycerin
Tapioca Powder

The first recipe I tried was from SoapQueen.com. You can find it here:

I had high hopes for this recipe since she does call herself the Soap Queen and had some pretty good reviews. One downside is that her original recipe is by weight which I thought at first would be more accurate, ended up working to my disadvantage. Personally, if I was to try her recipe again I would go by measurements. When I measured everything out by weight, it definitely did not equal out to her measurements given.

7 oz. Liquid Glycerin
1.8 oz. Castor Oil
0.7 oz. Celestial Waters Fragrance Oil
10.1 oz. Baking Soda
7.4 oz. Cream of Tartar
2.7 oz. Corn Starch
0.6 oz. Modified Tapioca Powder
5.8 oz. SLSA (Sodium Lauryl Sulfoacetate)
12 mL Diluted Emerald Lab Color
15 mL Diluted Blue Mix Lab Color

Or by measurement

1 cup Baking Soda
1 cup Cream of Tartar
1/2 cup Cornstarch
1 tablespoon Tapioca Powder
1 1/2 cups SLSA
1/3 – 1/2 cup Glycerin
1 tablespoon Castor Oil
2 tablespoons Celestial Waters Fragrance Oil

The problem I found with the weight recipe was that 7oz. of glycerin by weight was way too much and ruined my bars. This may not always be the case because the level of humidity in your area will play a role in how much glycerin you need. Glycerin is a humectant which means that it will automatically attract the moisture in the air.When I first rolled out the bars, the dough seemed a little too wet and squishy but Anne Marie mentioned in her video that the dough would be sticky. I figured they would dry out in the curing process but I was very wrong.

My bars looked fine when I initially cut them and put them out to dry but by day 2, the bars turned into piles of wet/dry sand…kinda looked like Thing from Fantastic Four. The sides that were touching the parchment paper started oozing out liquid which turns out to be called “glycerin dew” by soap makers. I’m just going to say that the bars were sweaty. I did read in the reviews that people did have some sweating issues with their bars and that maybe it could be remedied by just allowing the bars to cure longer.

And so I waited. 4 more days go by and the bars have lost more of their shape and have turned into little mounds of blue and purple wet/dry sand. I couldn’t take it anymore and decided that I would fix these bars somehow since I used the most expensive essential oils I had on this test recipe. Next time I test a recipe, I’m going with the cheapest throw away oils I have on hand.

To remedy this blobby bar situation, I decided I would just smoosh all the bars back together into one big dough ball and add more dry ingredients to combat the high amount of glycerin. I didn’t measure and kinda just kept sprinkling different dry ingredients based loosely on the ratios that were given in the original recipe until I got dough that I felt would be more moldable and less like marshmallow fluff. I ended up adding a little over half of its own weight back in dry ingredients to combat all that glycerin.

The bars are curing again now and are on day 2 of the curing process. So far, the bars look a million times better and are holding their shape. Whether they may contract the dreaded glycerin sweat is still out for debate but I have faith that these will have more of a Lush like texture.

Keep in mind that if you try out this recipe, and your bars get sweaty, they are still usable even if they are a wet blobby mound. You just won’t get the fun of crumbling it under the water. I took a small piece of the dough and threw it into a bowl when it was still wet just to see if it would make bubbles and was I surprised. I looked like a little kid who just discovered science or something.

I’ll update you guys on how they turn out!

TTFN

Clay and Oatmeal Mask

At 26, you would think I wouldn’t be too worried about wrinkles and my face just yet, but I am. Thanks to Mingo, I was blessed with huge pores. I mean huge. A lady at work once told me I had nice makeup on but I needed to use some pore filling cream. After that, I definitely started paying more attention to my skin and face.

First I started buying some Kiehl’s Rare Earth Pore Cleansing Masque. $23 for a 5oz jar. That’s pretty pricy, but I gave in and bought some when there was a 20% off sale. I figured it’s cheaper than Botox.

I wasn’t really impressed. I mean my face felt softer and all that but it wasn’t necessarily spectacular.

When I started looking into all these DIY projects, I figured there was easy at home face masks that I could do to produce the same results with less chemicals and for far cheaper.

I’ve been doing this clay and oatmeal mask every other day for a few weeks now and even White Man noticed my pores looked better. He pointed out the largeness before too. Thanks, Babe.

1TBSP Ground Oatmeal
1TBSP Bentonite Clay
1/2TBSP Greek Yogurt
1/2TBSP Honey
1/2TBSP Milk
1/4 TSP Sunflower Oil (Optional. Great for dry skin or if you want to let the mask sit longer.)

For the oatmeal, I put regular non-instant oatmeal into my coffee/spice grinder and just grind until its flour like. I grind a bunch at a time and keep it in a mason jar.

I bought my bentonite clay on Amazon. 32ozs of clay for $10.25…compare that to the Kiehls mask. Cray talk!

Make sure not let the clay come in contact with anything metal. It will neutralize some of its magnetic properties which helps suck the dirt out of those pores!

I’m sure you can figure out where to acquire the rest of the ingredients. Probably your pantry and refrigerator.

I always like to make mine in one of these smaller mason jars. Its glass and easy to store any extras in the fridge. I always like to put a saran wrap layer between the lid and the jar just to make sure the clay doesn’t touch any metal.

Mix up the ingredients. I use Popsicle sticks. They are cheap and can be helpful for spreading the mask all over your face.

Make sure you get a nice smooth paste. If it’s a little too thick still, just add in a little more milk. I like to switch up the consistencies sometimes depending on how much time I have to leave the mask on.

Once you reach the right consistency, just slather it on. Avoid your eyes. You know the standard instructions.

Let it sit for 10-15 minutes.

There is some debate whether you should let it dry on your skin because the clay begins to take out moisture when dry. Personally, I don’t have a problem with it because I find the milk and honey helps keep the skin moisturized and I usually do a sugar face scrub before I put the mask on. The scrub usually leaves enough oil on my face that my skin is still soft and hydrated even with the clay drying. So I let mine sit for longer.

When you’re ready to remove the mask (depending on whether you let it dry or not), try to get as much of it into the trash as possible. You never know if the clay will clog your pipes. If you let it dry as much as I do, you can start to just rub it off like little crumbles into the trash.

Your face should be nice and soft, maybe a little red but that will subside in a few hours. People with chronic acne swear by bentonite clay and I’m starting to understand why. I just imagine the clay making this sucking sound while it’s pulling all the toxins out of your skin.

Cheers to cleaner pores!